Versa-Matic® provides maximum performance in a mini package with our E8 3/8" pumps. Small enough to fit in your hand, yet capable of pumping up to 6.8 gallons per minute, these pumps can be mounted upright, sideways, and even inverted to adapt to your application. They also feature our patented Elima-Matic® Air Valve System to deliver non-stalling, non-icing, lube-free operation as well as the elimination of blow-by. E8 pumps are available in Polypropylene and Kynar® wetted materials of construction, with XL (Santoprene®), Geolast® or PTFE interiors.
Download product information for the E8 product line (PDF format): Data Sheet (specifications, performance charts & dimensions) Brochure
English
Metric
Flow Rate
adjustable to
0-6.8 gpm
0-26 lpm
Port Size
Inlet and Outlet
3/8" NPTF (BSP)
Air Inlet
0.25" NPTF
Air Exhaust
0.25" NPTF
Suction Lift
Dry
11'
3.4m
PTFE Dry
11'
3.4m
Max. Particle Size
Diameter
0.10"
2.5mm
Shipping Weights
Polypropylene
3.0 lbs
1.4 kg
Kynar
3.0 lbs
1.4 kg
Caution: Do not exceed 100 psig (6.8 bars) air supply or liquid pressure.
I did it online for 150, I am the kind of guy for 150 if it last a year it has done it's job, I'll just get another when it dies. I am looking for a 1/2 though to upgrade to a bigger pump. I spent 480 on one from PWP.
-- Edited by Roof Cleaning By A&E on Monday 9th of July 2012 08:28:14 PM
Hmm? Looks like this may be the ticket next go around. My all flo still runs great. I have had to replace the internal mechanism once on it but no biggie in its 2 1/2for yrs. Parts only ran about $60.00. Nice find Mr Tucker.
Very nice. It does look alot like the all flo, but a third of the price. Nice find.
The 3/8 all flow is kynar, that is more expensive, but you can get 3 of these for one all flow. I can almost guarantee 3 of these will keep you cleaning roofs longer then one 3/8 all flow will.
Hmm? Looks like this may be the ticket next go around. My all flo still runs great. I have had to replace the internal mechanism once on it but no biggie in its 2 1/2for yrs. Parts only ran about $60.00. Nice find Mr Tucker.
But Larry, you are Fortunate enough to live very close to Rex and Lori:)
Our guys up north have to face all the down time of shipping it back to PWP, and then waiting for Rex to fix it, and ship it back.
I am THINKING this way Larry.
Don't shit can your Kynar All Flo's. But, get one of these little bastards to have as a back up, until Lori and Rex can fix your All Flow, when it breaks ?
Here is the 3/8 all flow pump in Kynar, with Teflon Diapraghms.
It weighs 5 lbs vs 3lbs for the other pump, and SAYS it can hold 120 psi of air vs 100 for the other pump.
We NEVER run any air pump over 100 PSI, although the larger air pumps are better able to handle the higher pressures we have found.
It costs near 500.00 for this pump.
KV-038-B6
3/8” (9.5mm) PVDF/PTFE
Reliable polypropylene air center section combined with non-metallic clamped casing and elastomer materials ensure maximum chemical compatibility. Our patented “Max-Pass™” valve system allows operation under a variety of conditions, ranging from clean fluids to slurries. Ideal for low volume clean fluids transfer applications.
Suitable for Clean Fluids, Slurries or up to 1/16” Solids
Dimension Physical Dimensions See Drawings Air Inlet ¼" Liquid Inlet 3/8" Liquid Outlet 3/8" Weight 5 (2.3) LBS(KG)
Performance Maximum Flow 9 gpm (34.0 lpm) Maximum Air Pressure 120 psi (8.2 bar) Maximum Solids 1/16" (1.6 mm) Max Suction Lift Dry 15 ft (4.5 m) Max Suction Lift Wet 26 ft (7.9 m) Max Suction Lift Dry with PTFE 10 ft (3 m) Max Temperature 200 (93) °F (°C) Noise Level (with muffler) 86 dBA