The Roof Cleaning Institute Of America Training & Certification Forum
"Find A Certified Roof Cleaner Directory"

I found instructions on how to do it, but cant copy and paste. Or copy the 2 pics. Wasnt real helpfull, but is some help.

 I thought it attached from the pump side, but it goes behind rope pulley. So all that comes off first, you have to take a hole saw and cut out the "knock out" for the body of the starter, add the thing that makes electricity, put on the new flywheel, hook up the key box thing, just put it all back together! Sounds pretty easy! The kit is round 150 with shipping!

My 24 hp Honda has a 10 amp charger on it.

just went and took a pic of the outside, where the starter goes. cant see punch out from outside, pic I cant copy shows the punch out on the inside, I'll have to take the cover off to see if I see the same thing as in the pic, that I cant copy.

Got a Question Marcus, How does your starter bolt to the engine?

Some holes are going to have to be tapped out, I think. The larger holes you see are the ones used to mount the starter. I think? The wiring you see goes somewhere else.

The 2 holes pointing to the left need to be tapped out and that is how to mount the Key box?

How on earth can the pull cord rubbing cause plastic to get in the engine? You didn't have an air filter?