i just got the ammonyx Lo and i need to test it i thought i would start with 2 one gallon jugs of chlorine add 5oz of ammonyx Lo to one and 5oz of water to the other but what should i test it with i dont think the finger test is accurate enough i want something that can measure the strenth of the chlorine in both containers so i can see if there is a defference after a week or two
__________________
Billy Jensen New Port Richey FL 34652 727-243-4305 weguaranteeclean@live.com
i put this stuff next to my np9 i think it is acually thicker its like syrup and was not easy to rinse either. if it works like it says a little bit will go along way
__________________
Billy Jensen New Port Richey FL 34652 727-243-4305 weguaranteeclean@live.com
Careful !!! 1 Gallon NP 9 treats 200 gallons mix! Be conservative ? Too much will make it stick, but will not rinse easily, that IS, until it rains, LOL
i wasnt rinsing it off a roof i was just rinsing the cup i put it in the only roof iv'e ever rinsed was a white tile roof that was tinted yellow from dead alge after it was cleaned it was kinda funny to the home owner from white to black to yellow back to white
__________________
Billy Jensen New Port Richey FL 34652 727-243-4305 weguaranteeclean@live.com
would the stuff the pool guys use work for what i need i think they have something to measure the PH in a pool if im corect that is what im trying to measure
__________________
Billy Jensen New Port Richey FL 34652 727-243-4305 weguaranteeclean@live.com
Hi Billy- Ph testing for pools (at least the tests I'm familiar with) require the use of a chlorine neutralizer before doing the ph test. Sooo... maybe someone else knows a different route.