Here is my "Temporary" rig that we built last fall. I'm Calling it the TLDS, (Temproary Love distribution system) Temporary because i know updates are necessary and the barrell will someday be replaced with a tank. (tank, trailer, permanent hose reels, etc.) The barrell was cheep and seems to work well for the few jobs we have done so far. We are considering making a float type device which will show us the level in the tank. Having the ground man go look at the tank level is a PITA.
Using a 5850 Delavan pump, 5/8 Kuri-tech hose, (bought from Lori at PWP) and made our own manifold and valve system. Made our own nozzles with info we found here. The manifold is a simple design which allows us to transer SH to the barell, or draw chemical from another container as well as draw clean water for pump rinsing.
This skid needs a paint job, but it can easily be lifted in and out of the truck by two guys when empty (**Note, it is a great idea to put it in the truck before filling the barrell, unless Hercules is your partner) This skid unit works ok for us now since wer are just part time roof cleaners and pressure washers, but wanting to expand.
1/2 inch banjo ball ball valve with a 2 inch brass nipple and brass female hose connectoin to screw onto hose. Viton seals of course, 1/4 inch stainless QC and 1540 nozzle. After hand tightening the valve to the hose, a little tweek with a pair of channel locks seems to prevent any leaking so far.
I also have a 2560 nozzle and a 0050 nozzle. Prior to spreading any love we just sprayed some water and of the three valves the 1540 seemed the easiest to control with the best pattern. The 2560 will dump a lot of product in a hurry. Not likely to ever use it. Might try the 0050 under game conditions though.
We also made a complete second ball valve assembly as a back-up in the event the first one takes a dump. (two on hand is better that one in the bush)
I would entertain some expert opinions on other valve sizes to try.
I have noticed that when I close the valve about 1/2 way the pump and spray will pulsate, so when reducing the flow rate you have to be very careful where you are spraying to avoid a big oops!
__________________
Gene, Snow's Enterprises LLC Williamsport, IN 47993